Customer guide

Get your lights working

Set up the Surplife app, or fix a problem with lights that are already installed. Most fixes take a minute. If one doesn't work, call or text 385-292-1212.

Download the full guide (PDF) to print or keep on your phone.

Start here

Four checks that fix most problems

  1. Check the power

    Make sure the controller is plugged in and your lights are switched on.

  2. Turn on Bluetooth

    Switch Bluetooth on in your phone's settings. The app reaches your lights over Bluetooth.

  3. Stand close

    Move to within a few feet of the controller, then try again.

  4. Reopen the app

    Close Surplife completely, open it again and give it a moment to find your lights.

Troubleshooting

What's going wrong?

Tap the one that sounds like yours and follow the steps in order.

The app can't find my lights

You tap Add device or + and your controller never shows up.

  1. Check that the controller is plugged in and the lights are on.
  2. Turn on Bluetooth in your phone's settings. If your phone asks whether Surplife may use Bluetooth, choose Allow.
  3. Stand within a few feet of the controller.
  4. Unplug the controller, plug it back in, and keep your phone close while it starts up.
  5. Close Surplife completely, reopen it and tap Add device again.

Still not showing? Call or text us and we will get you connected.

My lights don't respond

The app opens, but the lights don't change or show as offline.

  1. Confirm the controller has power and the lights are on.
  2. Check that Bluetooth is on. Your lights should show Local Online in Surplife. Local offline means your phone's Bluetooth is not connected to them.
  3. Move closer to the controller and try again.
  4. Unplug the controller and plug it back in. Wait about a minute, then pull down on the Surplife home screen to refresh.

If they still don't respond, call or text us.

Only part of my roofline lights up

A color or scene stops short and the rest of the run stays dark.

  1. In Surplife, open Settings for your lights and find the number of lights.
  2. Make sure that number matches your system. Call or text us and we will tell you the right number for your home.

If a section stays dark or shows the wrong color after that, it needs a look from us. Call, text or request service online.

My timer didn't run

The lights didn't turn on or off when you expected.

  1. Open Timer in Surplife and check the on and off times, and which color or scene it uses.
  2. Make sure the controller still has power. A timer can't switch on a controller that is unplugged.

If the times are right and it still doesn't run, call or text us. Some timer features depend on your controller model.

I can't control my lights away from home

The app works in the driveway but not from work or on vacation.

That is expected. Your lights connect to your phone over Bluetooth, so the app controls them while you are home and within range. According to Surplife, control from anywhere and voice assistants need a controller that is connected to the internet.

Want that? Ask us what your controller supports.

My lights don't move with the music

Music is playing but the lights stay still.

  1. Make sure your lights show Local Online in Surplife. Music needs your phone connected to the lights.
  2. Tap your lights, then open Music Mode, the third icon along the bottom.
  3. Tap + to add music, then press play and watch whether the lights follow the beat.

Some controllers can also listen through a built-in microphone. That depends on your controller model, so ask us if you don't see it.

My app doesn't match this guide

A button is missing or a screen looks different.

Surplife updates its app from time to time, so your screens may look slightly different from the names used here. Some features also depend on your controller model.

If you can't find something, ask us and we will point you to it.

I got a new phone

You want your lights on a different phone.

  1. Download Surplife on the new phone.
  2. Log in with the same email you registered with.
  3. Turn on Bluetooth and stand near the controller.

If your lights don't appear after you log in, call or text us.

First-time setup

Connect your phone to your lights

Allow about five minutes. After that, changing your lights takes seconds.

  1. Download Surplife

    Search for Surplife in the App Store on iPhone or Google Play on Android, then install it.

  2. Create your account

    Open the app and register or log in. You can look around as a guest first. Use an email you check often. You will need it if you ever switch phones.

  3. Power on your lights

    Make sure your controller is plugged in and the lights are on.

  4. Turn on Bluetooth

    Switch Bluetooth on in your phone's settings and stay within a few feet of the controller.

  5. Add your device

    In Surplife, tap Add device or the + button. Your controller will appear, ready to connect.

  6. Name it and pick a room

    Give your lights a name, such as Front Roofline, and choose a room for them.

Controller not showing up? See The app can't find my lights.

Everyday use

What you can do in the app

Colors

Open Color. Choose the whole strip for one color, or segment mode to color sections differently. In segment mode you can paint colors on, erase them and add a gradient. Slide brightness up or down to suit the evening.

Scenes

Ready-made looks in four groups: Life for everyday, Landscape for nature-inspired blends, Festival for holidays and events, and Mood for soft, relaxed lighting. Tap DIY to build and save your own, and Favorite to keep a scene one tap away.

Timers

Timer sets the times your lights turn on and off, and which scene or color they use. Sequence plays several effects one after another for as long as you choose.

Music

Music Mode makes your lights react to music from your phone.

Surplife is made by its own company, not by Peak. Its screens can change with updates, and some features depend on your controller model. The app has its own help too: tap Profile at the bottom right, then Support.

Still stuck? We'll sort it out.

Call or text 385-292-1212 or email contact@peaklightingutah.com. Tell us what the app shows and which phone you have. A screenshot helps. Coverage is on the warranty page.